Work Order Lookup
Date | WO # | Location | Description | Requester | Status |
---|---|---|---|---|---|
8/12/2024 | 141673 | 0160 MEATS L | Water Pipe labeled TP50 is leaking in 0160 | Richard Roths | Assigned |
11/28/2022 | 240909 | 0115 MEATS L | UHU 4 is not running. | Michael Holtzbauer | Assigned |
3/25/2024 | 349833 | MEATS L | dock A, east side of building, manhole in drive to dock, concrete is broken and area is unstable | Janet Schneider | Assigned |
5/20/2024 | 363547 | MEATS L | call back for 18 May -DPS called AHU-10 in alarm | DPS dispatch DPS | Assigned |
9/11/2024 | 389734 | M0210 MEATS L | steam system pressure relief safety is leaking and rusting the ceiling and electrical conduits | Christopher Grosz | Assigned |
9/16/2024 | 390125 | M0210 MEATS L | Meats Lab Mech Room 0210 - North wall There is a leak in the heating hot water piping system (3") located at a coupling along the north wall. It appears that a section of piping may need to be replaced... | Michael Fields | Assigned |
10/15/2024 | 396927 | 0137 MEATS L | Meat Lab - Cut Floor Room 0137 Please replace EM Light Fixture (EML15) with a new wall mount model. This fixture does not work and has seen it full service life. Thanks- | Michael Fields | Assigned |
10/21/2024 | 397293 | M0083 MEATS L | Chang/Flush Coolant. "Solid particulate in the cooling system can lead to water pump and seal abrasion and subsequent leakage, copper and aluminum corrosion, and plugged oil cooler and radiator. Assess severity of contamination, and consider filtration or flushing as means to clean coolant reservoir if necessary." | Anthony Gervais | Open |
11/6/2024 | 403504 | MEATS L | USDA asked if we could get the leaves cleaned up in dock A and B. | Richard Roths | Assigned |
12/2/2024 | 409597 | M0060 MEATS L | 11/30 call back- AHU-10 return fan VFD alarm | DPS dispatch DPS | Assigned |
12/9/2024 | 410341 | GENERAL MEATS L | Generator transfer switch replacement for Meats Lab attention to Eric Robinson | Eric Robinson | Assigned |
1/10/2025 | 415240 | GENERAL MEATS L | New AED for 1st Floor Meats Laboratory. | Jacob Manternach | Open |
2/28/2025 | 424069 | MEATS L | ATTN: shops carpenter Install AED cabinet in specified location : See Lloyd for cabinet and dimensions | Maricel Lloyd | Open |
3/4/2025 | 427236 | R0225 MEATS L | The toilet is broken...I came in to a big piece of the porcelain laying on the floor. It has had a crack on that side(left) but was ok when I cleaned yesterday. I put the piece back in place but it probably won't stay there long. | Heather Voelker |
Closed 4/3/2025
|
3/7/2025 | 427738 | M0085 MEATS L | VFD #2 is not running - see Janet for details | Janet Schneider | Assigned |
3/7/2025 | 427780 | 0220 MEATS L | Our ThermoScientific TSX series ultra-low freezer has been having issues reaching the set temperature of -80 C. Two days ago it was running at -80 until the door was opened to put samples in it. At that point it warmed up to about -63 and has remained there since ( it will warm up further after door is opened, but returns to -63 and remains at that temperature). We have cleaned the air filters to no avail. It was last defrosted about a year and a half ago and, visually, does not seem to need defrosting at this time. Before reaching out to the manufacturer, I'm wondering if someone with experience with these freezers could take a look at ours. | Rodrigo Tarte | Assigned |
3/11/2025 | 428202 | 0179 MEATS L | Look at scale to repair/weld. PG105668 | Richard Roths | Assigned |
3/24/2025 | 429428 | M0210 MEATS L | Rack 1 freezers are running warm. Attn Scott Rogers | Richard Roths |
Closed 4/16/2025
|
3/25/2025 | 429550 | M0210 MEATS L | RWP1 | Richard Roths |
Closed 4/4/2025
|
3/28/2025 | 430495 | 0152 MEATS L | Steam ball valve leaking | Richard Roths | Assigned |
3/29/2025 | 430564 | MEATS L | call back. Meats Lab Rack 1 freezer running warm. ATTN: Joe Anastasi | Joseph Anastasi |
Closed 4/21/2025
|
3/31/2025 | 430594 | R0229 MEATS L | Bulb burnt out above the sink in mens restroom. | Heather Voelker | Assigned |
4/2/2025 | 434119 | MEATS L | replace failed evap fan in freezer box 138F. ATTN: Joe Anastasi. | Joseph Anastasi | Assigned |
4/3/2025 | 434197 | MEATS L | Meat Lab - Exterior East Elevation The Meat Lab staff have requested to have the blue painted handicapped ramp handrail re-welded as it appears that it was hit during snow removal efforts and broke loose at the beginning edge of the ramp near the sidewalk. (Ramp leads to Door X0190) Contact Mike Fields at 515-520-0523 if you have questions. | Michael Fields | Assigned |
4/3/2025 | 434274 | MEATS L | Remove and replace steam pipe stanchions and low-pressure piping from Meats Lab to steam tunnel B-C intersection. | Michael Olson | Open |
4/8/2025 | 434698 | S0181 MEATS L | Replace burned out lights in 181,280,285 and 287 | Richard Roths | Assigned |
4/9/2025 | 434786 | MEATS L | Hand rail between loading docks is broken and needs welded Att: Eric Robinson | Eric Robinson | Open |
4/10/2025 | 434879 | M0210 MEATS L | REPLACE SUCTION ACCUMULATORS RACK 4 ATTENTION JAMES SCOTT ROGERS. | James Rogers | Assigned |
4/14/2025 | 435034 | 0137 MEATS L | replace failed suction regulating valve on room 137 (fab cut room). ATTN: Joe Anastasi | Joseph Anastasi | Assigned |
4/16/2025 | 435343 | MEATS L | Call back-AHU 10 supply/return VFD faults | Tyler Pearson |
Closed 4/21/2025
|
4/18/2025 | 435488 | 0156 MEATS L | room is running warm. attn Scott Rogers | Richard Roths | Assigned |
4/23/2025 | 435821 | 0160 MEATS L | Meat Lab - Production Floor One cooling fan on an evaporator unit is not running. please call Mike Fields at 515-520-0523 to more clarification. Assign this work order to Scott Rogers. Thanks- | Michael Fields | Assigned |
4/23/2025 | 435837 | R0192 MEATS L | Flusher is stuck on. | Richard Roths |
Closed 4/24/2025
|
4/23/2025 | 435903 | MEATS L | 190 corridor is 85 degrees | Richard Roths | Assigned |
4/23/2025 | 435918 | MEATS L | It is currently 85 F in my office (215E) and the entire floor is very warm. MEATS L floor 2 | Daniel Unruh | Assigned |
4/24/2025 | 435993 | 0156A MEATS L | Check outlet for voltage and if is 3 phased | Richard Roths | Assigned |