Work Order Lookup
Loading data, please wait...
| Date | WO # | Location | Description | Requester | Status |
|---|---|---|---|---|---|
| 6/29/2022 | 199890 | Purchase and install dampers and control circuit for new printer exhaust | Nathan Thole | On Hold | |
| 11/4/2022 | 238312 | Repair Design Issues on AHU6 | Jeffrey Lamb | On Hold | |
| 2/1/2023 | 258106 | GENERAL PRINT | Water leak dripping on paper in warehouse, Center of room 0126. | Martin Grapp | On Hold |
| 5/11/2023 | 280191 | 0117 PRINT | Air from vents is 80 degrees, in 117, 119 and 122 | Chris Johnsen | Assigned |
| 10/10/2023 | 316154 | GENERAL PRINT | I'd like to request a check-in on our humidification system for Printing Services. We're at that time of year where it starts getting too dry for our operation, we're already seeing humidity levels drop below our ideal range of 45-55% RH the past few days. When we had similar trouble at this time last year, it was determined that some part of our humidification system wasn't working or hadn't been turned on. Note, we have a separate RO water system that adds additional humidification into the air handling system here. | Nathan Thole | Assigned |
| 12/29/2023 | 332036 | 0126 PRINT | The Temperature and Humidity levels in our production and warehouse area have been fluctuating a lot of the past couple weeks. Prior to that, they seem to have held pretty steady. We would like to maintain a constant relative humidity within the range of 45-55%, no matter the day or time of day, for print production reasons. I do know there was some work done on our supplemental humidification system a couple weeks ago, by Jeff Lamb. | Nathan Thole | Assigned |
| 5/13/2024 | 362798 | 0117 PRINT | It has been hot and stuffy in the front offices in the last week or so - rooms 117/119/122. Please adjust accordingly. | Freddie Krenk | Assigned |
| 12/13/2024 | 410828 | Not getting any water from the RO system for the humidifier. | Jeffrey Lamb | Open | |
| 12/13/2024 | 410851 | 0126 PRINT | There are two roof leaks that have shown up the last couple days, one in the north aisle, one in the middle aisle of our warehouse. Additional location information: North aisle and middle aisle of warehouse | Nathan Thole |
Closed 4/24/2025
|
| 1/3/2025 | 414756 | 0113 PRINT | Humidity levels for this area appear to be down significantly, starting early this morning. Ideal levels should be between 45-55% RH for production reasons. Note, there has been work done recently on our humidification system by Jeff Lamb. Thank you Additional location information: Main Production Room | Nathan Thole | Assigned |
| 1/21/2025 | 416262 | 0113 PRINT | Relative humidity levels in this room are extra low and starting to cause issues with print production. Additional location information: 0113 Main Production Room | Nathan Thole | Open |
| 1/22/2025 | 416510 | 0127 PRINT | Slow water leak from ceiling in warehouse Additional location information: North Aisle, about halfway down | Nathan Thole |
Closed 4/24/2025
|
| 3/3/2025 | 427180 | We need several 4 foot florescent light bulbs replaced. 3 in room 107, 5 in room 114, 1 in room 102, 19 in room 126(warehouse), 35 in room 113(production floor) most urgent need is in room 107. Thank you! PRINT | Martin Grapp | Assigned | |
| 3/12/2025 | 428328 | M0116 PRINT | RFA3, return fan for AHU3, check bearings, fan is noisier than usual. | Janet Schneider |
Closed 4/30/2025
|
| 3/12/2025 | 428413 | Humidity levels in our Warehouse (126) are too high 60+, and Humidity levels in our Production Room (113) at too low 30-. PRINT Additional location information: 126 & 113 | Martin Grapp | Assigned | |
| 3/20/2025 | 429210 | 0119 PRINT | Its cold in the room. | Mark Sebring | Assigned |
| 4/3/2025 | 434226 | GENERAL PRINT | Attn: jlamb -humidifier drain valve leaking by repair or replace the valve and hook up metasys alarm to notify us when the humidifier is in alarm | Jeffrey Lamb | Assigned |
| 4/4/2025 | 434317 | We have various light bulbs out around our building, primarily in the office areas. We'd like to have someone make a sweep through our whole area and replace any bulbs that need to be. PRINT Additional location information: Printing Services' area(s) primarily, but may be worth checking with Extension Store on SE corner of building as well. | Nathan Thole | Assigned | |
| 4/7/2025 | 434525 | 0113 PRINT | Relative humidity levels in this room appear to be low and could start to cause issues with print production. Additional location information: Main Production Room | Nathan Thole | Assigned |
| 4/8/2025 | 434653 | Fire code: One of the Fire Department Connection hose couplings does not rotate. | Alex Wiley | Assigned | |
| 4/16/2025 | 435318 | R0120 PRINT | Please replace both light bulbs over the sink .Both bulbs are flickering .You will need to bring the light bulbs. | Kristine Vandenbroeke | Assigned |
| 4/16/2025 | 435320 | R0121 PRINT | Please replace both light bulbs over the sink. Both bulbs are flickering. You will need to bring the light bulbs. | Kristine Vandenbroeke | Assigned |
| 4/16/2025 | 435324 | R0110 PRINT | Please replace the light bulb over the sink area, you will need to bring the light bulbs with you . There are none in building | Kristine Vandenbroeke | Assigned |